Open Source Sip: [OpenSBC] OpenSBC in Proxy Mode ...

6 Replies Last post: Mar 17, 2008 10:35 AM by Guest

Guest

Mar 14, 2008 6:06 AM

[OpenSBC] OpenSBC in Proxy Mode

st1\:*{behavior:url(#default#ieooui) }

Hi,

I am unable to establish calls between two users when opensbc runs in proxy mode. The users are registered
successfully but when I call other user it gives me a response 404. Can anyone
help me in this issue?

This is the scenario.

   Alice     openSBC in Proxy mode    Bob              |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                |     |                |                | So now alice should be able to call bob. I have configured everything correctly as shown below.  [OpenSBC General Parameters]SIP Log Level=3PTRACE Log Level=1Log File Prefix=proxySBC Mode=Proxy Only ModeInterface Address Array Size=1Interface Address 1=sip:10.0.10.10:5060Always Proxy Media=TrueEnable Local Refer=FalseEncryption Mode=XOREncryption Key=GSTransaction Thread Count=10Session Thread Count=10Alerting Timeout=30000Seize Timeout=60000 [Trusted Domains]Accept All Calls=TrueDomain Array Size=0 [Local Domain Accounts]Accept All Registration=TrueAccount Array Size=0  But when alice calls or vice-versa it gives 404. Can anyone solve this issue???

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Opensipstack-osbcdevel mailing list
Opensipstack-osbcdevel at lists dot sourceforge dot net
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

Guest

1. Mar 14, 2008 9:09 AM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

Please send in the level 5 log so we can have more insight on what's
happening. Is B2BOnly mode resultsing to 404 as well?

Joegen

Mohan Arun Kumar wrote:

Hi,

I am unable to establish calls between two users when opensbc runs in
proxy mode. The users are registered successfully but when I call
other user it gives me a response 404. Can anyone help me in this issue?

This is the scenario.

Alice openSBC in Proxy mode Bob

So now alice should be able to call bob. I have configured everything correctly as shown below.

[OpenSBC General Parameters]
SIP Log Level=3
PTRACE Log Level=1
Log File Prefix=proxy
SBC Mode=Proxy Only Mode
Interface Address Array Size=1
Interface Address 1=sip:10.0.10.10:5060
Always Proxy Media=True
Enable Local Refer=False
Encryption Mode=XOR
Encryption Key=GS
Transaction Thread Count=10
Session Thread Count=10
Alerting Timeout=30000
Seize Timeout=60000

[Trusted Domains]
Accept All Calls=True
Domain Array Size=0

[Local Domain Accounts]
Accept All Registration=True
Account Array Size=0

But when alice calls or vice-versa it gives 404. Can anyone solve this issue???

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________
Opensipstack-osbcdevel mailing list
Opensipstack-osbcdevel at lists dot sourceforge dot net
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date: 3/12/2008 1:27 PM

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Opensipstack-osbcdevel mailing list
Opensipstack-osbcdevel at lists dot sourceforge dot net
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

Guest

2. Apr 15, 2008 10:06 PM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Joegen,
Thanks for your reply.
I have seen in the logs about this behavior, it gives

NO STATIC ROUTE DEFINED *** From: sip:alice@10.0.16.54 Target:

sip:charles@10.0.16.54

so I have added a relay route in the configuration as [sip:*@10.0.16.54]
sip:10.0.16.54:5060. But still it's the same behavior.

I cannot send the log in attachment so I send it by link :
http://www.fileden.com/files/2006/9/8/208261/proxy-2008-03-15-17473.log

Regards,
P. Mohan Arun Kumar

-----Original Message-----
From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net
[opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On Behalf
Of Joegen E. Baclor
Sent: Friday, March 14, 2008 6:40 PM
To: opensipstack-osbcdevel at lists dot sourceforge dot net
Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

Please send in the level 5 log so we can have more insight on what's
happening. Is B2BOnly mode resultsing to 404 as well?

Joegen

Mohan Arun Kumar wrote:

issue?

This is the scenario.

Alice openSBC in Proxy mode Bob

So now alice should be able to call bob. I have configured everything

correctly as shown below.

[OpenSBC General Parameters]
SIP Log Level=3
PTRACE Log Level=1
Log File Prefix=proxy
SBC Mode=Proxy Only Mode
Interface Address Array Size=1
Interface Address 1=sip:10.0.10.10:5060
Always Proxy Media=True
Enable Local Refer=False
Encryption Mode=XOR
Encryption Key=GS
Transaction Thread Count=10
Session Thread Count=10
Alerting Timeout=30000
Seize Timeout=60000

[Trusted Domains]
Accept All Calls=True
Domain Array Size=0

[Local Domain Accounts]
Accept All Registration=True
Account Array Size=0

But when alice calls or vice-versa it gives 404. Can anyone solve this

issue???

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date:

3/12/2008 1:27 PM

-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Opensipstack-osbcdevel mailing list
Opensipstack-osbcdevel at lists dot sourceforge dot net
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

Guest

3. Apr 15, 2008 10:06 PM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Joegen,
B2BUA is functioning fine and it has no problem in this issue. Only
problem is with the proxy mode.

Regards,
P. Mohan Arun Kumar

-----Original Message-----
From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net
[opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On Behalf
Of Mohan Arun Kumar
Sent: Friday, March 14, 2008 7:12 PM
To: opensipstack-osbcdevel at lists dot sourceforge dot net
Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Joegen,
Thanks for your reply.
I have seen in the logs about this behavior, it gives

NO STATIC ROUTE DEFINED *** From: sip:alice@10.0.16.54 Target:

Regards,
P. Mohan Arun Kumar

issue?

This is the scenario.

Alice openSBC in Proxy mode Bob

So now alice should be able to call bob. I have configured everything

correctly as shown below.

But when alice calls or vice-versa it gives 404. Can anyone solve this

issue???

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date:

3/12/2008 1:27 PM

Guest

4. Apr 15, 2008 10:06 PM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Mohan,

We were able to replicate this problem. One of our engineers is already
applying a fix. He will update you as soon as the fix is available.
Thanks for reporting the bug.

Just curious, I must admit that Proxy-Only mode is somehow given least
attention because OpenSBC is primarily a B2BUA. Why do you want to use
OpenSBC as a true proxy and not specialized SIP proxies like OpenSER?

Joegen

Mohan Arun Kumar wrote:

Hi Joegen,
B2BUA is functioning fine and it has no problem in this issue. Only
problem is with the proxy mode.

Regards,
P. Mohan Arun Kumar

-----Original Message-----
From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net
[opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On Behalf
Of Mohan Arun Kumar
Sent: Friday, March 14, 2008 7:12 PM
To: opensipstack-osbcdevel at lists dot sourceforge dot net
Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Joegen,
Thanks for your reply.
I have seen in the logs about this behavior, it gives

NO STATIC ROUTE DEFINED *** From: sip:alice@10.0.16.54 Target:

Regards,
P. Mohan Arun Kumar

issue?

This is the scenario.

Alice openSBC in Proxy mode Bob

So now alice should be able to call bob. I have configured everything

correctly as shown below.

But when alice calls or vice-versa it gives 404. Can anyone solve this

issue???

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date:

3/12/2008 1:27 PM

Guest

5. Apr 15, 2008 10:06 PM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

st1\:*{behavior:url(#default#ieooui) }

Hi Joegen,

Thanks for informing it
as a bug. It saved a lot of time for this feature.

I was just exploring the features of OpenSBC
and thinking of developing a product which has both the capabilities of proxy
and also as SBC at the edge of the network. :-). So I was using this in proxy
mode.

Regards,

P. Mohan Arun Kumar

Hi Mohan,

We were able to replicate this problem.  One of our engineers is already

applying a fix.  He will
update you as soon as the fix is available. 

Thanks for reporting the bug.

Just curious, I must admit that Proxy-Only mode is somehow given least

attention because OpenSBC is primarily a B2BUA.   Why do you want to use

OpenSBC as a true proxy and not specialized SIP proxies like OpenSER?

Joegen

Mohan Arun Kumar wrote:

> Hi Joegen,

> B2BUA is functioning fine and it has no problem in this issue.
Only

> problem is with the proxy mode.

> Regards,

> P. Mohan Arun Kumar

> -----Original Message-----

> From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net

> [opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On
Behalf

> Of Mohan Arun Kumar

> Sent: Friday,
March 14, 2008 7:12 PM

> To: opensipstack-osbcdevel at lists dot sourceforge dot net

> Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

> Hi Joegen,

> Thanks for your reply.

> I have seen in the logs about this behavior, it gives

> *** NO STATIC ROUTE
DEFINED *** From: sip:alice@10.0.16.54 Target:

> sip:charles@10.0.16.54

> so I have added a relay route in the configuration as
[sip:*@10.0.16.54]

> sip:10.0.16.54:5060. But still it's the same behavior.

> I cannot send the log in attachment so I send it by link :

>
http://www.fileden.com/files/2006/9/8/208261/proxy-2008-03-15-17473.log

> Regards,

> P. Mohan Arun Kumar

> -----Original Message-----

> From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net

> [opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On
Behalf

> Of Joegen E. Baclor

> Sent: Friday,
March 14, 2008 6:40 PM

> To: opensipstack-osbcdevel at lists dot sourceforge dot net

> Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

> Please send in the level 5 log so we can have more insight on
what's

> happening.   Is
B2BOnly mode resultsing to 404 as well?

> Joegen

> Mohan Arun Kumar wrote:

>> Hi,

>> I am unable to establish calls between two users when opensbc
runs in

>> proxy mode. The users are registered successfully but when I
call

>> other user it gives me a response 404. Can anyone help me in
this

> issue?

>> This is the scenario.

>>    Alice     openSBC in Proxy
mode    Bob        

>>     
|               
|               
|

>>     
|         
      |               
|

>>     
|               
|               
|

>>     
|                |               
|

>>     
|               
|               
|

>> So now alice
should be able to call bob. I have configured everything

> correctly as shown below.

>> [OpenSBC General Parameters]

>> SIP Log Level=3

>> PTRACE Log Level=1

>> Log File Prefix=proxy

>> SBC Mode=Proxy Only Mode

>> Interface Address Array Size=1

>> Interface Address 1=sip:10.0.10.10:5060

>> Always Proxy Media=True

>> Enable Local Refer=False

>> Encryption Mode=XOR

>> Encryption Key=GS

>> Transaction Thread Count=10

>> Session Thread Count=10

>> Alerting Timeout=30000

>> Seize Timeout=60000

>> [Trusted Domains]

>> Accept All Calls=True

>> Domain Array Size=0

>> [Local Domain Accounts]

>> Accept All Registration=True

>> Account Array Size=0

>> But when alice
calls or vice-versa it gives 404. Can anyone solve this

> issue???

>
------------------------------------------------------------------------

> -

>> This SF.net email is sponsored by: Microsoft

>> Defy all challenges. Microsoft(R) Visual Studio 2008.

>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

>
------------------------------------------------------------------------

>> _______________________________________________

>> Opensipstack-osbcdevel mailing list

>> Opensipstack-osbcdevel at lists dot sourceforge dot net

>> https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

>
------------------------------------------------------------------------

>> No virus found in this incoming message.

>> Checked by AVG.

>> Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release
Date:

> 3/12/2008 1:27 PM

>
------------------------------------------------------------------------

> -

> This SF.net email is sponsored by: Microsoft

> Defy all challenges. Microsoft(R) Visual Studio 2008.

> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

> _______________________________________________

> Opensipstack-osbcdevel mailing list

> Opensipstack-osbcdevel at lists dot sourceforge dot net

> https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

>
------------------------------------------------------------------------

> -

> This SF.net email is sponsored by: Microsoft

> Defy all challenges. Microsoft(R) Visual Studio 2008.

> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

> _______________________________________________

> Opensipstack-osbcdevel mailing list

> Opensipstack-osbcdevel at lists dot sourceforge dot net

>
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

> -------------------------------------------------------------------------

> This SF.net email is sponsored by: Microsoft

> Defy all challenges. Microsoft(R) Visual Studio 2008.

> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

> _______________________________________________

> Opensipstack-osbcdevel mailing list

> Opensipstack-osbcdevel at lists dot sourceforge dot net

>
https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

-------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

Guest

6. Apr 15, 2008 10:06 PM

in response to: Guest

Re: [OpenSBC] OpenSBC in Proxy Mode

Hello Mohan,

I have already provided the fix in the CVS. Please update your OpenSBC
and check if it solves your issue.

regards,

Mohan Arun Kumar wrote:

Hi Joegen,

Thanks for informing it as a bug. It saved a lot of time for this feature.

I was just exploring the features of OpenSBC and thinking of
developing a product which has both the capabilities of proxy and also
as SBC at the edge of the network. :-). So I was using this in proxy
mode.

Regards,

P. Mohan Arun Kumar

Hi Mohan,

We were able to replicate this problem. One of our engineers is already

applying a fix. He will update you as soon as the fix is available.

Thanks for reporting the bug.

Just curious, I must admit that Proxy-Only mode is somehow given least

attention because OpenSBC is primarily a B2BUA. Why do you want to use

OpenSBC as a true proxy and not specialized SIP proxies like OpenSER?

Joegen

Mohan Arun Kumar wrote:

Hi Joegen,

B2BUA is functioning fine and it has no problem in this issue. Only

problem is with the proxy mode.

Regards,

P. Mohan Arun Kumar

-----Original Message-----

From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net

[opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On Behalf

Of Mohan Arun Kumar

Sent: Friday, March 14, 2008 7:12 PM

To: opensipstack-osbcdevel at lists dot sourceforge dot net

Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

Hi Joegen,

Thanks for your reply.

I have seen in the logs about this behavior, it gives

*** NO STATIC ROUTE DEFINED *** From: sip:alice@10.0.16.54 Target:

sip:charles@10.0.16.54

so I have added a relay route in the configuration as [sip:*@10.0.16.54]

sip:10.0.16.54:5060. But still it's the same behavior.

I cannot send the log in attachment so I send it by link :

http://www.fileden.com/files/2006/9/8/208261/proxy-2008-03-15-17473.log

Regards,

P. Mohan Arun Kumar

-----Original Message-----

From: opensipstack-osbcdevel-bounces at lists dot sourceforge dot net

[opensipstack-osbcdevel-bounces at lists dot sourceforge dot net] On Behalf

Of Joegen E. Baclor

Sent: Friday, March 14, 2008 6:40 PM

To: opensipstack-osbcdevel at lists dot sourceforge dot net

Subject: Re: [OpenSBC] OpenSBC in Proxy Mode

Please send in the level 5 log so we can have more insight on what's

happening. Is B2BOnly mode resultsing to 404 as well?

Joegen

Mohan Arun Kumar wrote:

Hi,

I am unable to establish calls between two users when opensbc runs in

proxy mode. The users are registered successfully but when I call

other user it gives me a response 404. Can anyone help me in this

issue?

This is the scenario.

Alice openSBC in Proxy mode Bob

| | |

So now alice should be able to call bob. I have configured everything

correctly as shown below.

[OpenSBC General Parameters]

SIP Log Level=3

PTRACE Log Level=1

Log File Prefix=proxy

SBC Mode=Proxy Only Mode

Interface Address Array Size=1

Interface Address 1=sip:10.0.10.10:5060

Always Proxy Media=True

Enable Local Refer=False

Encryption Mode=XOR

Encryption Key=GS

Transaction Thread Count=10

Session Thread Count=10

Alerting Timeout=30000

Seize Timeout=60000

[Trusted Domains]

Accept All Calls=True

Domain Array Size=0

[Local Domain Accounts]

Accept All Registration=True

Account Array Size=0

But when alice calls or vice-versa it gives 404. Can anyone solve this

issue???

------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

------------------------------------------------------------------------

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

------------------------------------------------------------------------

No virus found in this incoming message.

Checked by AVG.

Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date:

3/12/2008 1:27 PM

------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

-------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

This SF.net email is sponsored by: Microsoft

Defy all challenges. Microsoft(R) Visual Studio 2008.

http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________

Opensipstack-osbcdevel mailing list

Opensipstack-osbcdevel at lists dot sourceforge dot net

https://lists.sourceforge.net/lists/listinfo/opensipstack-osbcdevel

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.21.7/1331 - Release Date: 3/16/2008 10:34 AM

Go to original post

Mar 14, 2008 6:06 AM

[OpenSBC] OpenSBC in Proxy Mode

Actions

More Like This